Módulo alimentación PS9400
  • Módulo alimentación PS9400

B&R X20PS9400 | Módulo alimentación

X20 del módulo de alimentación para el controlador de bus
e internos de E / S de suministro,
Enlace X2X bus de alimentación

Cantidad

  • Política de seguridad (editar con el módulo Información de seguridad y confianza para el cliente) Política de seguridad (editar con el módulo Información de seguridad y confianza para el cliente)
  • Política de envío (editar con el módulo Información de seguridad y confianza para el cliente) Política de envío (editar con el módulo Información de seguridad y confianza para el cliente)
  • Política de devolución (editar con el módulo Información de seguridad y confianza para el cliente) Política de devolución (editar con el módulo Información de seguridad y confianza para el cliente)
Short description X20PS9400
Power supply module 24 VDC supply module for bus controller, X2X Link bus supply and I/O
Interfaces 1x RS232 service interface
General information X20PS9400
B&R ID code 0x1F8C
Status indicators Overload, operating status, module status, RS232
Diagnostics  
Module run/error Yes, with status LED and software status
RS232 data transfer Yes, with status LED
Overload Yes, with status LED and software status
Power consumption 1)  
Bus 1.42 W
Internal I/O 0.6 W
Additional power dissipation caused by the actuators (resistive) [W] -
Electrical isolation  
Bus - RS232 No
I/O feed - I/O supply No
BC/X2X Link feed - BC/X2X Link supply Yes
Certification types  
CE Yes
c-UL-us Yes
GOST-R Yes
Bus controller / X2X Link supply input X20PS9400
Input voltage 24 VDC -15% / +20%
Input current Max. 0.7 A
Fuse Integrated, cannot be replaced
Reverse polarity protection Yes
Bus controller / X2X Link supply output X20PS9400
Rated output power 7.0 W
Parallel operation Yes 2)
Redundant operation Yes
Overload behavior Short circuit / temporary overload protection
Input I/O supply X20PS9400
Input voltage 24 VDC -15% / +20%
Fuse Erforderliche Vorsicherung max. T 10 A
Reverse polarity protection No
Output I/O supply X20PS9400
Rated output voltage 24 VDC
Behavior if a short circuit occurs Erforderliche Vorsicherung
Permitted contact load 10.0 A
Interfaces X20PS9400
Service interface  
Type RS232
Design Contact via 12-pin terminal block TB12
Max. transfer rate 115.2 kbit/s
Operating conditions X20PS9400
Mounting orientation  
Horizontal Yes
Vertical Yes
Installation at altitudes above sea level  
0 to 2000 m No limitations
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
EN 60529 protection IP20
Environmental conditions X20PS9400
Temperature  
Operation  
Horizontal installation -25°C to +60°C
Vertical installation -25°C to +50°C
Derating When operated at temperatures above 55°C, the rated output current for the CPU / X2X Link supply is reduced to 5 W.
Storage -40°C to +85°C
Transport -40°C to +85°C
Relative humidity  
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical characteristics X20PS9400
Note Order 1x X20TB12 terminal block separately
Order 1x X20BB8x bus base separately
Spacing 12.5+0.2 mm
   
1) The values specified are maximum values. The exact calculation is also available for download as a data sheet with the other module documentation on the B&R homepage.
2) In parallel operation, only 75% of the rated power can be assumed. Please ensure that all parallel operating power supplies are switched on and off simultaneously.
X20PS9400

Descargas

BYRPS9400.pdf

Descargas (0)